Mobile Phone
+86 186 6311 6089
Call Us
+86 631 5651216
E-mail
gibson@sunfull.com

The internal and external structure of the refrigerator

Household Refrigerator Construction (Most Commonly with Top and Bottom Doors)
> The principle is the same as that of air conditioners: transport heat and move the heat inside the box to the outside. No cold air is produced

I. Exterior (Visible)
1. Shell: Steel plate, the middle layer is thick polyurethane insulation foam, which isolates outside heat from entering
2. Door + Handle
3. Magnetic Door Seal (Rubber Strip): Close to the box, preventing cold air from escaping, aging leads to power consumption and freezing
4. Control Panel/Display Screen: Adjust temperature, mode
5. Bottom Water Collection Tray, Bottom Cover Plate: Above the compressor, collects defrost water, evaporated by the compressor heat
6. Adjustable Feet / Wheels: Level the refrigerator
7. Condenser (Heat Dissipation Mesh): In the old models it was at the back; in the new models, it is mostly hidden on the bottom sides (steel wire coils)
8. Back Bottom Part: Compressor Cover Plate

II. Internal Storage of the Box (Daily Storage of Items)
Tempered Glass Shelf: Adjustable height
Door Shelf (Door Box): Place beverages, sauces
Fruit and Vegetable Moisture Retention Drawer (Freshness Box): Control humidity to store vegetables
Freezing Drawer / Freezing Basket
Internal Lighting Lamp
Ventilation Cover Plate (Only for air-cooled non-freezing models): Covers the evaporator, with the fan, evaporator, defrost heating tube hidden behind
Ventilation Door (Multi-circulation Refrigerator): Controls the cold air volume in the refrigeration compartment

III. Core of Refrigeration Inside (Hidden in the Back Panel/Bottom, Only Seen During Maintenance)
✅ Four Major Refrigeration Components (Same as Air Conditioners)
1. Compressor (Heart, Bottom): Compresses refrigerant, variable-speed models can adjust speed to save energy
2. Condenser (Heat Exchanger): Here the hot refrigerant cools down and turns into high-pressure liquid
3. Throttle: Capillary Tube / Electronic Expansion Valve: Reduces pressure and temperature
4. Evaporator (Absorbs Heat): Here the refrigerant absorbs heat, making the box cooler
Direct Cooling Refrigerator: The evaporator is attached to the inner wall of the inner liner, relying on natural convection, will accumulate thick frost, requires manual defrosting
Air-Cooled Non-Freezing Refrigerator: The evaporator is hidden behind the freezer compartment, equipped with an evaporator fan to blow cold air; with defrost heating tube, defrost sensor, defrost timer, it automatically defrosts regularly, invisible thick frost

✅ Other Accessories
Drying Filter: Filters out refrigerant impurities and moisture, preventing pipe blockage
Temperature Sensor (Thermometer): Measures the temperature inside the box and the evaporator
Main Control Board: The brain of the entire machine, controls the compressor, fan, defrosting
Starters, Overload Protection Devices: Protect the compressor

IV. Simple Circulation Process
Compressor → Condenser (Heat Release) → Drying Filter → Capillary Tube (Reduce Pressure and Cool Down) → Evaporator (Absorbs Heat from Inside the Box) → Returns to Compressor, Repeat Cycle


Post time: Nov-13-2026