Copper Head NTC Thermistor Sensor Cooling Heating Switch Thermostat NTC Sensor
Advantage Compared with the Industry
|Product Name||Copper Head NTC Thermistor Sensor Cooling Heating Switch Thermostat NTC Sensor|
|Use||Refrigerator Defrost Control|
|Operating Temperature||-40°C~150°C (dependent on wire rating)|
|Ohmic Resistance||5K +/-2% to Temp of 25 deg C|
|Beta||(25C/85C) 3977 +/-1.5%(3918-4016k)|
|Electric Strength||1250 VAC/60sec/0.1mA|
|Insulation Resistance||500 VDC/60sec/100M W|
|Resistance Between Terminals||Less than 100m W|
|Extraction Force between Wire and Sensor Shell||5Kgf/60s|
|Approvals||UL/ TUV/ VDE/ CQC|
- Air conditioners - Refrigerators
- Freezers - Water Heaters
- Potable Water Heaters - Air Warmers
- Washers - Disinfection Cases
- Washing Machines - Driers
- Thermotanks - Electric iron
- Closestool - Rice cooker
- Microwave/Electricoven - Induction cooker
Ntc temperature sensor is selected generally by the NTC thermistor, probe (metal shell or plastic shell), etc., to extend the lead, and metal terminal or terminal device
1.epoxy resin packaging
2.aluminum shell, copper shell, stainless steel shell and other packaging
3.plastic shell package
4.plus fixed metal sheet
5.Special form of packaging
● High sensitivity, fast response
● Small size, easy to install
● Resistance and B values with high precision, consistency interchangeability
● Using double encapsulation process, with good sealing and insulation resistance to mechanical impact, flexural capacity
● Simple and flexible structure, according to the customer set different requirements.
● Wide operating temperature range, the device is suitable for room temperature -55 ℃ ~ 315 ℃, Temperature devices suitable temperature higher than 315 deg.] C (currently can reach 2000 ℃), low temperature can be applied to -273 ℃ ~ -55 ℃;
● Easy to use, the resistance value can be arbitrarily selected between 0.1 ~ 100kΩ;
● Easy to process into a complex probe shape, can be mass production;
● Good stability, strong overload capacity.
We operate additional cleavage for the wire and pipe parts to reduce the flow of epoxy resin along the line and reduce the height of the epoxy. Avoid gaps and breakage bending of wires during assembly.
Cleft area effectively reduce the gap at the bottom of the wire and reduce the immersion of water under long-term conditions.Increase the reliability of the product.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.