Mobile Phone
+86 186 6311 6089
Call Us
+86 631 5651216
E-mail
gibson@sunfull.com

125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts

Short Description:

Introduction: HB2 Bimetal Thermostat

These snap-action thermostat is used for preventing fire and damages caused by overheating in the circuit of electric & electronic products.

Horizontal and Vertical Terminal Available. Customized Wire Connection and Bracket Type Available.

Function: temperature control

MOQ: 1000pcs

Supply Capacity: 300,000pcs/month


Product Detail

Company Advantage

Advantage Compared with the Industry

Product Tags

Product Parameter

Product Name

125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts

Temperature setting range (at no load)

-20°C ~ 180°C

Tolerance

Indicated temp ±3°C, ±5°C

ON-OFF differential temperature. (General)

Min 7~10K

Life Cycle

15A/125V AC 100,000 cycles, 7.5A/250V AC 100,000 cycle

Contact System

Normally closed / Normally open

Electrical Rating

15A / 125VAC, 10A / 240VAC, 7

Diameter of bimetal disc

Φ12.8mm(1/2″)

Terminal type Customized

Cover/Bracket

Customized

Applications

- Automatic coffeemakers
- Water heaters
- Sandwich toasters
- Dishwashers
- Boilers
- Dryers
- Electric heaters
- Washing machines
- Refrigerators
- Microwave ovens
- Water purifiers
- Bidet, etc

application

The Advantage of Automatic Reset Thermostat

- Snap Action
- Manual or Automatic Resettable
- Safety Design according to IEC Standard
- Available with Both Normally Closed Type and Normally Open Type Contacts
- Customized Wire Connection and Bracket Types Available
- Single Operation Device(SOD): Open on temperature rise, no closure unless the temperature 0°C or below -35°C

p-d-1
p-d-2

Product Advantage

- Long life
- High precision
- EMC test resistance
- No arcing
- Small size and stable performance.

p-d5
p-d6

Feature Advantage

Automatic reset temperature control switch: as the temperature increases or decreases, the internal contacts are automatically opened and closed.

Manual reset temperature control switch: When the temperature rises, the contact will automatically open; when the temperature of the controller cools down, the contact must be reset and closed again by manually pressing the button.

p-d1
p-d2

Craft Advantage

One-time action:
Automatic and manual integration.

Testing Process

Test method of action temperature: install the product on the test board, put it in the incubator, first set the temperature at -1°C, when the temperature of the incubator reaches - 1°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes and test the recovery temperature of the single product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 2°C. When the temperature of the incubator reaches 2 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.

P-D4

  • Previous:
  • Next:

  • 办公楼1Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.

    Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.7-1

  • Write your message here and send it to us